8069976663 /8069976665 chennaichemicals.com@gmail.com

New In Store

Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat
Shop Now

Latest News

Type what you are searching for:

Make your own custom-made popup window!

Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore
[contact-form-7 404 "Not Found"]

Product

Antiscalant - Antifoulant Corrosion Inhibitor 704

Product for  

Antiscalant / Antifoulant – Corrosion Inhibitor 704

Antiscalant / Antifoulant – Corrosion Inhibitor 704 is a highly effective liquid an-tiscalant/antifoulant developed to control scale precipitates and reduce particulate fouling within membrane separation systems

Product Enquiry

Request for Quote and Get Heavy Discount on Price

Description

Antiscalant / Antifoulant – Corrosion Inhibitor 704 is a highly effective liquid an-tiscalant/antifoulant developed to control scale precipitates and reduce particulate fouling within membrane separation systems. This highly effective liquid antiscalant/antifoulant is formulated specifically to be used with RXSOL Coagulant. It is imperative that the coagulants used are compatible with the antiscalant/antifoulant being injected as incompatible chemicals may cause membrane fouling.

Application:

For maximum effectiveness, Antiscalant / Antifoulant Corrosion Inhibitor 704 should be added prior to the static mixer or cartridge filter housing.For potable applications the maximum dosage is 10 mg/L. Maximum dilution is 10% with RO permeate or DI water. 

Dose:

Typical dosage range is between 1 and 6 mg/L. Maximum dilution is temperature related as shown:

Temperature  Maximum Dilution %
<30°C 10
30 – 35°C 25
>35°C 50

Important Note: Over and under-dosing may cause membrane fouling so please contact Rx Marine International representative to define the optimal feed point and dosage rate. Maximum Dilutions

Note:

Future & Benefit

  • Excellent results as a replacement for softenerfilters
  • Compatible with SoliSep* MPT150 coagulant
  • Highly effective over a wide-range of waters For calcium-based and sulfate-based scales, notably, barium sulfate.
  • Compatible with all of the leading RO membranes
  •  Maintains cleaner membrane surfaces by inhibition and dispersing particulate foulants
  • Effective over a wide pH range
  • May be fed neat or diluted
  • Compatible with feedwaters that contain aluminum and iron oxides

Handling : 

Avoid prolonged exposure. Provide adequate ventilation. Wear appropriate personal protective equipment. Observe good industrial hygiene practices. Use care in handling/storage.

Storage  : Store in a cool, dry place out of direct sunlight. Keep only in the original container.

Additional information

MSDS

Product Name

Antiscalant / Antifoulant – Corrosion Inhibitor 704

Part Number

RXSOL-33-3337-025

Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone

+91 22 65113333 / 5555 / 9999

Fax

+91 22 2781 1318 :::AOH :0091 9821214367

Email

123@rxmarine.com

Website

http://www.rxmarine.com

 

Name     of        Substance                         

Cas Number

EC Number

Wight %

Disodium phosphonate

13708-85-5

  ——

 2 – 10%

Non Hazardous Ingirdent

 

 

 90 – 95%

 

Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret.

 

 

Signal Word                       

Warning

Hazard Statements

May be corrosive to metals.

Precautionary statements – prevention

Avoid release to the environment.
Wear protective gloves/ protective clothing/ eye protection/ face protection.

Precautionary statements – response

IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
IF ON SKIN: Wash with plenty of soap and water.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

  

 

Eye Contact

Rinse with water. Get medical attention if irritation develops and persists.

Skin Contact

In case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an emollient. Remove contaminated clothing and shoes. Cold water may be used.Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention.

 

 

Inhalation:

Move to fresh air. If breathing is difficult, give oxygen. Get medical attention immediately if symptoms occur.

Ingestion:

Do not induce vomiting. Obtain medical attention.If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain open airway and prevent aspiration.

Notes to Physician

Treat symptomatically

 

Flammability                                                 

Non-flammable.

Flash Point

Not applicable.

Suitable extinguishing media

No information available

Hazardous combustion
products

During fire, gases hazardous to health may be formed.

Protective Equipment

In case of fire and/or explosion do not breathe fumes. Use standard firefighting procedures and consider the hazards of other involved materials. Move containers from fire area if you can do so without risk. Cool containers / tanks with water spray.

Specific Hazards Arising from the Chemical

Not considered to be a significant fire risk.  

 

Small Spillage

Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination.Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements

Large Spillage

Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Absorb spillage to prevent material damage. Use a non-combustible material like vermiculite, sand or earth to soak up the product and place into a container for later disposal. Following product recovery, flush area with water.

Personal Protection

Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wear appropriate protective equipment and clothing during clean-up. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ensure adequate ventilation. Local authorities should be advised if significant spillages cannot be contained. For personal protection, see section 8.

Enviromental Precaution

Do not let product enter drains.

Methods and materials for
containment and cleaning

Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts

 

 

Handling

Avoid prolonged exposure. Provide adequate ventilation. Wear appropriate personal protective equipment. Observe good industrial hygiene practices. Use care in handling/storage.In case of insufficient ventilation, wear suitable respiratory equipment. If ingested, seek medical advice immediately and show the container or the label. Keep away from incompatibles such as oxidizing agents,.

Storage

Store in a cool, dry place out of direct sunlight. Keep only in the original container. Store away from incompatible materials (see Section 10 of the SDS). Store in accordance with local/regional/national/international regulation.

Advice on general occupational hygiene

Advice on safe handling Observe label precautions. Change contaminated clothing. Wash hands after working with substance.

 

Engineering Control

Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the work-station location.

Personal Protection

Eye/face Protection :  Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin and body protection : Wear appropriate protective gloves and clothing to prevent skin exposure. Respiratory Protection :  Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator  exposure limits are exceeded or if irritation or other symptoms are experienced.

Other Protection Measure

Handle in accordance with good industrial hygiene and safety practice.

Exposure Limit

No exposure limits noted for ingredient(s).

General hygiene considerations

Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants.

                                       

        Gloves                       Suit                          

 

Form        

Liquid

Colour

Clear

Odour

Slight amine

Odor Threshold

No Information Available

pH

11.1 – 11.3

Freezing Point

-5 °C

Boiling Point

102°C

Flash Point

Not Applicable

Evaporation Rate

< 1 (Ether = 1)

Flammability (solid, gas)

No Data Available

Explosive limits

No Data Available

Vapour pressure

18 mm Hg

Vapor pressure temp

70 °F (21 °C)

Vapour Density

< 1 (Air = 1)

Specific Gravity

1.13 – 1.14  at 25 °C

Partition coefficient

No data available

Explosive properties

None

Solubility

Soluble in water

Ignition temperature

Not available

 

Recativity                       

May be corrosive to metals.

Stability

Product is stable.

hazardous Decomposition

No hazardous decomposition products are known.

Conditions to avoid

Strong Heating

Incompatible materials

Strong oxidizing agents. Metals

Hazardous Polymerization

Hazardous polymerization does not occur.

 

Rout Of Entry

Absorbed through skin. Eye contact. Inhalation. Ingestion.

Toxicity to Animal

Dermal     LD50 Rabbit    > 5000 mg/kg, (Calculated according to GHS additivity formula)
Inhalation LC50 Rat        > 5 mg/l, 4 Hour, (Calculated according to GHS additivity formula)
Oral          LD50 Rat        > 5000 mg/kg, (Calculated according to GHS additivity formula)

Toxic Effects on Humans

Inhalation : No adverse effects due to inhalation are expected. Skin contact  : Prolonged or repeated contact may cause transient irritation. Eye contact : Direct contact with eyes may cause temporary irritation. Ingestion : Expected to be a low ingestion hazard.

Special Remarks on other Toxic Effects on Humans:

Skin corrosion/irritation : Prolonged skin contact may cause temporary irritation. Serious eye damage/eye irritation : Direct contact with eyes may cause temporary irritation.Respiratory or skin sensitization : Respiratory sensitization This product is not expected to cause respiratory sensitization. Skin sensitization : This product is not expected to cause skin sensitization. No data available to indicate product or any components present at greater than 0.1% are mutagenic or genotoxic.
Germ cell mutagenicity : Carcinogenicity This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA.

 

 

 

Eco Toxicity

Not Available

COD and BOD 5

COD (mgO2/g) 65 (calculated data)
TOC (mg C/g) 22 (calculated data)

Products of Biodegradation:

No Information available

Mobility in soil

No Information available

Results of PBT and vPvB assessment

Substance(s) in the mixture do(es) not meet the criteria for PBT or vPvB .

Other adverse effects

Discharge into the environment must be avoided.

 

 

Waste treatment Method

Waste material must be disposed of in accordance with the national and local regulations. Leave chemicals in original containers. No mixing with other waste. Handle uncleaned containers like the product itself

DOT 

 

UN        Number                                         

UN 3267

Proper shipping name

CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S. (PHOSPHONIC ACID, [NITRILOTRIS(METHYLENE)]TRIS, SODIUM SALT)

Hazard Class

8

Packing group

III

TDG 

 

UN        Number                                         

UN 3267

Proper shipping name

CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S. (PHOSPHONIC ACID, [NITRILOTRIS(METHYLENE)]TRIS, SODIUM SALT)

Hazard Class

8

Packing group

III

IATA

 

UN        Number                                         

UN 3267

Proper shipping name

CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S. (PHOSPHONIC ACID, [NITRILOTRIS(METHYLENE)]TRIS, SODIUM SALT)

Hazard Class

8

Packing group

III

IMDG/IMO

 

UN        Number                                         

UN 3267

Proper shipping name

CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S. (PHOSPHONIC ACID, [NITRILOTRIS(METHYLENE)]TRIS, SODIUM SALT)

Hazard Class

8

Packing group

III

 

 

 

Fedral and State Regulation

This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.

Other Regulation

Not Regulated

WHMIS (Canada)

Not Regulated

DSCL (EEC)

R36- Irritating to eyes. S2- Keep out of the reach of children. S24/25- Avoid contact with skin and eyes. S46- If swallowed, seek medical advice immediately and show this container or label.

 

HMIS                             

 

Health Hazard

: 1

Fire Hazard

: 0

Reactivity

: 0

Personal Protection

: H

 

Fire :                            

 

Health Hazard

: 1

Fire Hazard

: 0

Reactivity

: 0

Specific Hazard

: H

 

 

Other Information

 

The information above is believed to be accurate and represents the  best information   currently    available  to us.  However,   we   make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and  we assume  no liability resulting from its use. Users should make  their  own  investigations  to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International  has been advised of the possibility of such damages.

 

Technical Bulletin

Description :

Antiscalant / Antifoulant – Corrosion Inhibitor 704 is a highly effective liquid an-tiscalant/antifoulant developed to control scale precipitates and reduce particulate fouling within membrane separation systems. This highly effective liquid antiscalant/antifoulant is formulated specifically to be used with RXSOL Coagulant. It is imperative that the coagulants used are compatible with the antiscalant/antifoulant being injected as incompatible chemicals may cause membrane fouling.

Application :

For maximum effectiveness, Antiscalant / Antifoulant Corrosion Inhibitor 704 should be added prior to the static mixer or cartridge filter housing.For potable applications the maximum dosage is 10 mg/L. Maximum dilution is 10% with RO permeate or DI water. 

Dose :

Typical dosage range is between 1 and 6 mg/L. Maximum dilution is temperature related as shown:

 

Temperature

 Maximum Dilution %

<30°C

10

30 – 35°C

25

>35°C

50

Important Note: Over and under-dosing may cause membrane fouling so please contact Rx Marine International representative to define the optimal feed point and dosage rate. Maximum Dilutions.

Future & Benefit

Excellent results as a replacement for softenerfilters

Compatible with SoliSep* MPT150 coagulant

Highly effective over a wide-range of waters For calcium-based and sulfate-based scales, notably, barium sulfate.

Compatible with all of the leading RO membranes

 Maintains cleaner membrane surfaces by inhibition and dispersing particulate foulants

Effective over a wide pH range

May be fed neat or diluted

Compatible with feedwaters that contain aluminum and iron oxides

Handling : 
 
Avoid prolonged exposure. Provide adequate ventilation. Wear appropriate personal protective equipment. Observe good industrial hygiene practices. Use care in handling/storage.

Storage  : Store in a cool, dry place out of direct sunlight. Keep only in the original container.

Show Buttons
Hide Buttons